RCF manual Chapter 7 Commissioning 23
Chapter 7 Commissioning
For models with communication, it is easiest to set parameters by using Regio tool
©
If the measured room temperature is to be compensated for, this should be performed only
under stable conditions.
Troubleshooting
The Manual/Auto function in Regio tool
©
enables testing various outputs. The output itself is
not affected directly, but rather the software object that controls the output. This means that
the built-in safety functions cannot be deactivated.
The controllers have different types of indications which can be used to support
troubleshooting. See section Indications.
To Next Page
Loading...
Need help?
General
