EasyManuals Logo

REMKO GPS Series User Manual

REMKO GPS Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
REMKO GPS series
As a prerequisite for any guarantee claims to
be considered, it is essential that the ordering
party or their representative complete and return
the "certificate of guarantee" to REMKO GmbH &
Co. KG at the time when the units are purchased and
commissioned.
The units are tested several times to verify their
correct function. However, if malfunctions should
arise that cannot be remedied by the operator with
the assistance of the troubleshooting section, please
contact your specialist dealer or contractual partner.
The units are designed exclusively for heating and
ventilation purposes in industrial or commercial
use (no living space heating) on the basis of their
structural design and equipment.
The unit design allows for the use of the unit
accessories approved by the manufacturer.
The units must only be operated by appropriately
instructed personnel.
With non-observance of the manufacturer's
specifications, the respective local legal requirements
or after arbitrary alterations to the units,
the manufacturer shall not be liable for resulting
damages.
Any improper use of the units is prohibited.
The units must be installed by a qualified technician,
who is responsible for the observance of the existing
regulations, rules and guidelines.
Customer service and
Guarantee
Disposing of packaging
When disposing of packaging material, please
consider our environment.
Our units are carefully packed and delivered in stable
transport packaging and, if applicable, on a wooden
pallet.
The packaging materials are environmentally-friendly
and can be recycled.
By recycling packaging materials, you make a
valuable contribution to the reduction of waste and
conservation of raw materials.
Therefore, only dispose of packaging material at
appropriate collection points.
Disposal of the old unit
The manufacturing process for the units is subject
to continuous quality control.
Only high-grade materials are processed, the majority
of which are recyclable.
You also contribute to environmental protection
by ensuring that your old equipment is only disposed
of in an environmentally-friendly manner.
Therefore, only bring the old unit to an authorised
recycling business or to an appropriate collection
point
.
Intended use
Environmental protection
and recycling
NOTE
Operation other than the types listed
in this operating manual is prohibited.
With non-observance, any liability and claim
to guarantee expire.
CAUTION
Copyright
The redistribution, even in part, or the use of
this documentation for purposes other than
intended is strictly prohibited without the written
authorisation of
REMKO GmbH & Co. KG
.
Transport and handling
The units from the GPS range are supplied fastened
to a wooden pallet and covered with suitable
stable cardboard packaging. Suitable transport
vehicles, capable of bearing the load, must be used
to transport the units. All transport work must be
performed by experienced personnel, who are familiar
with the applicable health and safety regulations.
The unit can be unpacked once it has been
transported to the installation site.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the REMKO GPS Series and is the answer not in the manual?

REMKO GPS Series Specifications

General IconGeneral
BrandREMKO
ModelGPS Series
CategoryHeater
LanguageEnglish

Related product manuals