REMKO GPS Series User Manual

16
REMKO GPS series
Hanging from the ceiling
The accessory assembly kit ceiling suspension,
with 4 universal suspension brackets, is available
for installation as a suspended unit.
When fastening to the ceiling with chains or ropes
provided by the customer, use appropriate fastening
materials that are suitable for the weight of the unit.
Vertical air flow
If installation with a vertical air flow is intended,
this should be specified during the order phase.
An additional thermostat is installed on the fan for this.
Detailed view A:
Horizontal air flow
A
Detailed view B:
Vertical air flow
B
NOTE:
Small guide holes are provided for correct
arrangement of the suspension brackets. These
must be aligned at the top edge of the unit. Refer
to corresponding figure here. With a vertical unit
installation (only possible with the GPS series),
a fan thermostat must be additionally installed.
CAUTION
Installation as a suspended unit with verti-
cal air flow can lead to damage and the failure
of the unit without the fan thermostat.

REMKO GPS Series Specifications

General

Brand	REMKO
Model	GPS Series
Category	Heater
Language	English