Rena XPS-80 - Resetting the Address Printer

RENA XPS-80/90
User Guide
5-55
5.14 Resetting the address printer
Without loss of alignment configurations
Non-Mechanical Reset
The following procedure resets all printer menu settings back to
factory defaults, except for the following alignment (mechanical)
settings:
VERT. CORR.1-2:
CARTRIDGE CORR:
DIST. CORR.1-2:
All non-mechanical values and configurations which have been
customized (changed) are reset to the default settings:
• Switch the printer off.
• Keep the prog key pressed and switch the printer on again.
The display shows that the procedure was successful:
• Release the key.
With loss of alignment configurations
Default Reset
The following procedure resets all printer menu settings back to
factory defaults. All values and configurations which have been
customized (changed) are reset to the default settings:
• Switch the printer off.
• Keep the start and prog keys pressed and switch the printer
on again.
The display shows that the procedure was successful:
• Release the keys.
XPS-90/80
Default Reset
Non-Mechanical Reset
Alignmnt Values Saved