Renault Clio Cup - Master Cylinder and Braking Amplifier Service

2010 Release
E-49
Master cylinder
- Removal
Operations Photos
1 -
Remove the air box (1) and intake
pipe (2).
2 -
Drain the master cylinder tank with a
syringe.
3 -
Remove the clutch master cylinder
pipe (3).
4 -
Remove the brake pipes, taking care
to catch any brake fluid discharge.
5 -
Remove the 2 master cylinder
mounting bolts (4) on the amplifier.
6 -
Remove the master cylinder – tank
assembly.
7 -
Remove the master cylinder tank
mounting bolt (5).
8 -
Remove the master cylinder tank.
- Refitting
Perform the removal steps in reverse order.
The master cylinder seals (9) must be
replaced.
Ensure that the cup is centered on the braking
amplifier when refitting.
Tightening torques:
 Master cylinder tank mounting
bolts: 8.5Nm.
 Master cylinder mounting
nuts: 25Nm.
 Brake pipes: 17Nm.
2
5
3
1
4