16A-2
STARTING - CHARGING
Alternator: Removal - Refitting
K4M
16A
a Remove:
-the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
-the air deflectors,
-the headlights (see Front headlight: Removal -
Refitting) (80B, Headlights),
-the front bumper mountings (see Front bumper
support: Removal - Refitting) (42A, Front upper
structure),
-the audible warning (see Horn: Removal - Refit-
ting) (82B, Horn),
-the front impact cross member (see Front impact
cross member: Removal - Refitting) (41A, Front
lower structure),
-the bonnet catch (see Bonnet latch: Removal -
Refitting) (52A, Non-side opening element mecha-
nisms),
-the engine wiring channel from the cooling fan as-
sembly.
a Unclip the hoses from the cooling fan assembly.
a Remove:
-the upper bolts (2) from the front end panel,
-the front end panel upper clips (3) .
a the front end panel lower bolts (4) .
a Move aside the front end panel.
K4M, and 858 or 866
135719
135713
To Next Page
