2.20
NAVIGATION SETTINGS (3/5)
“Route”
“Route Planning Method”
This function enables the cur-
rent route calculation method to be
changed and to recalculate if neces-
sary. By choosing this type of route,
you also define the default route cal-
culation method for future route cal-
culations.
To fund out about the various meth-
ods of calculating a route, please
refer to the section on “Map”.
Route preferences
The route preferences are restric-
tions which affect the route calcula-
tion. Please refer to the section on
“Map”.
“Map”
This function sets the map display,
the map view, etc. Please refer to the
section on “Map”.
“Traffic”
(depending on the vehi-
cle)
This menu enables you to activate or
deactivate traffic information, and to
adjust the settings.
Please refer to the section on “Traffic”.
Note: The availability of “Traffic” serv-
ices varies depending on the country.
To reset your data and go back
to the default settings, press the
pop-up menu button, then “Reset”.
To Next Page
Loading...
