Renault RAFALE - Page 132

TRIP COMPUTER
2
130 - Getting to know your vehicle
Instrument panel in miles
(option to switch to km/h)
Withthevehiclestationaryandtheen-
gine on, from the multimedia screen
19 select the "Vehicle" world, press
the"Settings"menufollowedby"Sys-
tem", "Units" then "Speed".
Choose between km/h or mph.
Thespeedometerandsomeofthedis-
tanceinformationdisplayedonthein-
strument panel are converted.
To return to the previous mode, repeat
the same operation.
Note: once the battery is switched off,
the trip computer automatically returns
to the original unit of measurement.
Pleaserefertothemultimediainstruc-
tions for more information.
To use certain driving aids,
it is necessary to change
the unit of measurement on
the instrument panel in order to
obtain the correct information
when driving in a country where
the speed units differ from those
set as default on your vehicle.
For safety reasons, carry
out any adjustments
whilethevehicleissta-
tionary.
Vehicle settings personalisation
menu
Depending on the vehicle equipment,
thisfunctionallowsyoutoactivate/de-
activate and adjust some of the
vehicle's functions.
Accessing the settings menu
Withthevehiclestationaryandtheen-
gine on, from the multimedia screen 1
select the "Vehicle" world, press the
"Vehicle" menu then the "Exterior" tab
to access the various settings.