Renault Trafic - Page 117

3
NU650_12_G3-FRA.qxd 9/12/04 11:22 Page 3.24
TRAFIC - NU 650-12 X83
C:\Documentum\Checkout\NU650-12_T3-ENG.win 17/12/2004 7:21
-page24
3.24
REAR BENCH SEATS: REMOVING/FITTING (continued)
Fitting
- position the bench seat over the
front anchorage points;
- push the bench seat until it sits
over the rear anchorage points;
- lower latches 3 andpushthem
until they lock.
Ensure that the bench seats
are locked in place
correctly when refitting
them.
Check that the side seat belts are
locked in their casing correctly.
The rear bench seats must
be placed on their original
anchorage points.
The rear-facing bench seat position
must not be used when the vehicle
is being driven.