REO REOVIB MFS 368 - 6.1 Information and Service; Service Menu Functions

REOVIB MFS 368
Operating instructions
15
6 Info
6.1 Software version
7 Service
7.1
Clear ERROR &
reset
Clear ERROR & reset execute
7.2 Factory settings*
5
Load factory settings execute
7.3 Parameter set Select parameter set 1 / 2 / 3 / 4
7.4 Save parameters
Save current parameters in the
selected parameter set (only if key no.
143 is activated)
7.5
Load parameter
set
Load and apply selected parameter set execute
7.6 Language Select language
DE, EN EN
7.7 Key Enter key number
117 / 127 /
143
7.8 Backlight
Backlight: Permanently On / Off /
timeout
On/Off /
0...999 sec
7.9 Display inverted Invert display colours switched Off
*
1
only available with the housing version
*
2
Other frequencies on request
*
3
These menu items are only displayed if key no. 127 is activated.
*
4
depending on unit type
*
5
After loading the factory settings, check the "UMax" parameter.
Key 117: Entry "Close" becomes visible. This can be used to hide/show various menus.
Key 137: "Lock" entry This can be used to hide/show additional menus.
Key 127: Entry "Service On" becomes visible. This makes further items visible in the service menu.
Key 143: Entry "Save parameters" becomes visible.