REOVIB MFS 368
Operating instructions
4
Electric shock if the cable shield is not connected
Capacitive coupling can cause life-threatening touch voltages if the cable shields are not
connected.
- Connect cable shields and unused cores of power lines to earthed housing potential
on at least one side.
Arcing when disconnecting a plug connection during operation
Disconnecting a plug connection during operation can cause an electric arc, which can
result in serious or fatal injury.
- Only open plug connections when they are de-energised.
Before opening the housing, pull out the mains plug
Before any intervention in the unit, allow at least 5 minutes for the capacitors to
discharge.
Injury due to hot surfaces
In case of malfunction, overload and insufficient ventilation, contact with a hot surface may
cause skin burns. With the 6A and 8A versions, the heat sink temperature can reach 70 °C
during operation.
Material damage due to incorrect output voltage
Independent of the input voltage, the frequency converter's output voltage is 205 VAC when
delivered. When using 110 VAC feeder coils, the output voltage must be set with parameter:
"Umax", otherwise the feeder coil may be damaged.
Improper assembly of parts
Unsuitable assembly tools, screwing methods, or non-observance of the assembly
instructions can lead to falling parts or equipment.
To Next Page
Loading...
Need help?
General