have configured it to.
Steps:
1. To configure E-mail settings, please go to “Device Settings” > “E-mail
Settings”.
● Enable SSL or TLS: Whether the email server you’re using requires a
secure link. This is on by default and should be left on if you’re using any
of the preset email servers.
● SMTP Server: Type in the SMTP server for the sender Address.
● SMTP Port: Set the correct port number for the SMTP server you use.
● Sender Address: Enter your address which will be used to send out the
notification email. Type it in the format youraddress@gmail.com
(please NOTE, the email address should be your own email account).
● Password: Enter the password for the Sender email address.
● Recipient Address: Enter the receiver’s E-mail address that the
notification E-mail will be sent to. You can specify up to three recipient
E-mail addresses.
● Attachment: Select to attach picture or receive only notification(disable)
when send E-mail.
● E-mail Test: Click this button to test whether the e-mail setting is
successful. If test failed, please check the internet connection and the
34