EasyManua.ls Logo

Reolink Argus User Manual

Reolink Argus
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background image
Chapter 10
Battery
Reolink provides 4 non-rechargeable CR123A batteries, one of which has
1600mAH.
    With these 4 batteries, the Argus supports up to:
180 days in Standby mode;
840 minutes of motion recording and Live view in day time;
420 minutes of motion recording and Live view in night vision with IR
LED’s on.
Note: Reolink Argus is not designed for 24/7 full capacity running or
around-the-clock live streaming. It’s designed to record motion events and
remotely view live streaming only when you need it. Long time live view or
frequently PIR triggering will drain the batteries more quickly.
10.1 Requirement of the Battery
The Reolink Argus camera will work with the following batteries:
Battery
Type
Voltage
non-rechargeable
CR123A
3V
Rechargeable
CR123A
3.6V~4.2V
10.2 Battery Status
The camera will keep a record of the power consumption for the last 4
weeks, to check the battery status, tap on the camera in Devices, or go
to Device Settings > Battery”.
Daily amount of time for live streaming & motion recording will be shown
on the calendar.
38

Other manuals for Reolink Argus

Question and Answer IconNeed help?

Do you have a question about the Reolink Argus and is the answer not in the manual?

Reolink Argus Specifications

General IconGeneral
Video FormatH.264
Wireless StandardIEEE 802.11b/g/n
Operating Frequency2.4 GHz
Operating Temperature-10° C to 55° C (14° F to 131° F)
Resolution1080p Full HD
ConnectivityWi-Fi
Field of View130°
Audio2-way audio
WeatherproofIP65
StoragemicroSD card (up to 128GB)
Wireless SecurityWPA/WPA2

Summary

Device Management

Add New Device via QR Code

Step-by-step guide to adding a new Reolink camera using its QR code.

Add New Device via UID

Instructions for manually adding a Reolink camera by entering its Unique ID (UID).

Modify Camera Login Password

Procedure to change the login password for the Reolink camera for enhanced security.

Reset Camera

Instructions on how to perform a factory reset on the Reolink camera using the reset button.

Install and Place the Camera

Reolink Argus Placement Guidelines

Provides guidance on camera placement, field of view, and PIR motion sensor detection.

Camera Placement Dos and Don'ts

Lists recommended practices and warnings to avoid false alarms and interference.

Quick Configuration Settings

Wi-Fi Settings Configuration

Steps to connect the camera to a Wi-Fi network or modify existing settings.

Live View and Audio

Starting the Live View Feed

Instructions on how to access and start viewing the live video stream from the camera.

Two-way Audio Functionality

Steps to enable and use the two-way audio feature for communication.

Playback Recorded Videos

Alarm and Motion Detection Settings

Adjust PIR Sensitivity

Guide to setting the PIR motion sensor sensitivity level (Low, Mid, High) for detection.

Email Settings Configuration

Instructions for configuring email alerts, including SMTP server and recipient details.

SD Card Usage and Management

Battery and Power Management

Related product manuals