IF.UG.IM_R1
Part Description Service Part Number
Pump, Peristaltic Masterflex IP 650 RPM with Pump Head
IP Pump head, Peristaltic
1.375" Back Control Pressure Valve
Back Pressure Valve, KTF/KPS 600/700
BPCV cable to BPCV (Back Pressure Valve)
Leviflow Sensor CABLE (for single use flow sensors) External
Single Flow Meter Assembly
FUSE, 10 A, 250 VAC, 1/4" x 1 1/4"
Flowmeter Cable for I25/I35 with ferrite cable, 12 wire, ICS-2.4-50
LeviFlow Sensor Cable, LFI-C.2-10 (Internal cable)
Cable, USB, A R/A to B R/A, 3ft
Assy., Enclosure, Back Pressure PCB
Cable, power supply, black E 14AWG/3Cond
Cable, SJOOW, 12 Gauge, 3 wires
Flowmeter Cable for I25/I35 w/out ferrite Cable, 12 wire, ICS-2.4-50
Power Supply, 12 VDC, 20 Watt
Terminal Power Feed, Offset Lug, Busbar Accessory
Network Switch, Unmanaged 4 Port
2-position E-Stop w/o illumination
Connector, RJ-45, female passthrough
Connector, USB, female, passthrough
Disconnect Shaft, Piston Handle
Disconnect, Pistol Handle (main Handle))
Strain Relief, 2-hole, 5.0mm, ½” NPT
Cable, Octopus 18 pin Pres, Female, long
HMI, 15”, SST, 4:3, 256GB, Windows 10
Flow Sensor, Clamp-on, LFSC-i19X
UV Photometer, 4 20mA Output