REPLIGEN Spectrum KMPi User Manual

13 400-12355-000 Rev. 03
KR2i / KMPi TFF Systems
Materials of Construction
System Parts List:
Part Description Quantity
KMPi Pump Drive w/ Integrated Pressure Monitor 1
Auxiliary Component Octopus Cable 1
Pressure Transducer Octopus Cable 1
Power Supply Cable 1
KMPi 13LPM Easy-Load Pump Head 1
KMPi Fittings Kit 1
KrosFlo Module Accessory Kit 1
SAW Scale 12" x 12" 60kg x 1g 1
10L Process Reservoir 1
PharmaPure #26 Tubing Pack 1
PharmaPure #73 Tubing Pack 1
Automatic Backpressure Valve 1
Process System Computer 1
KrosFlo KF Comm Software Suite (on USB) 1
Materials of Construction
Part Number Material
TFF System (Product Contact Surfaces)
Tubing / Reservoir Closures C-Flex® / Pharmapure®
Reservoirs Polypropylene
Disposable Pressure Transducers Polysulfone
Plastic Fittings Polypropylene / Polysulfone
Hollow Fiber Module (Module Sold Separately)
Membrane ME, mPES, PES or PS
Housing Pigmented and Non-pigmented Polysulfone
Potting Polyurethane / Epoxy
End-caps Pigmented Polysulfone
Setup and Operation
7.1 Basic Setup
NOTE: See Section 8.2 for Sample Applications.
1. Mount the TFF system on a flat, horizontal surface with no more than two Pump Heads
attached (see Section 9 for Pump Head Setup details)
2. Connect both Octopus Cables to the back of the TFF system
3. Connect up to three pressure transducers to the Pressure Transducer Octopus Cable ports as
suitable for application

REPLIGEN Spectrum KMPi Specifications

General

Brand	REPLIGEN
Model	Spectrum KMPi
Category	Laboratory Equipment
Language	English