ResMed S9 Series Clinical Guide

19
English
Managing Climate Control
Designed to be ideal for most patients, Climate Control Auto enables the automatic delivery of a constant
value of absolute humidity while protecting against rainout.
To allow for increased flexibility, Climate Control can be turned to Manual in either the Patient Setup
(when enabled) or the Clinical Setup menus. Setting Climate Control to Manual disables the automatic
control of humidity and allows the patient to set humidity and temperature levels independently.
However, rainout protection is not provided when Climate Control is set to manual.
Mode
Humidity Temperature
Setting range Default settings Setting range Default settings
Climate Control – Auto Climate Control
Constant
absolute humidity
(depending on
temperature
setting)
– Off,
1
60ºF–86ºF
(16ºC–30ºC)
80ºF (27ºC)
Climate Control – Manual
Humidity level Heated tube
Off–6.0
(0.5 increments)
3 Off, 60ºF–86ºF
(16ºC–30ºC)
80ºF (27ºC)
1
When the temperature setting is set to Off, the tube will not heat the air nor will the humidifier heat the water to add
humidity to the air.
368220.indb 19 6/09/2011 9:21:49 AM

ResMed S9 Series Specifications

General

Data Storage	SD card
Device Type	CPAP Machine
Pressure Range	4 to 20 cm H2O
Sound Level	24 dB
Power Supply	100-240V AC, 50/60Hz
Therapy Modes	CPAP, VPAP ST, VPAP Auto
Altitude Adjustment	Yes
Operating Temperature	+41°F to +95°F (+5°C to +35°C)
Operating Humidity	10% to 95% non-condensing
AC Voltage	100-240V AC
Humidifier	optional
Ramp	Yes