Routine Use
Connecting l- Connect the circuit.
the Circuit
IMPORTANT! Before each use,
examine
the
flexible
tubing
for any
damage
or
debris.
If
necessary,
clean the
tubing
to
remove
the
debris.
Replace
any
damaged
tubing.
a.
Connect the mask to the
headgear,
following the instructions
included
with
the
headgear.
b. Put on the mask and
headgear.
Press the Pressure Start/Stop
button
on the top of the
REMstar
Plus to turn the
airflow
ON.
Breathe normally through your nose.
Adjusting 2. Adjust the circuit.
Lie
down on your bed and adjust the
flexible
tubing
the Circuit ^°
^°
move
if
you
turn in your sleep. Adjust the mask and
headgear
until you have a comfortable fit and
there
are no
airflow
leaks
into your eyes.
REMstar
Plus
User
Manual O 15
To Next Page
Loading...
