EasyManua.ls Logo

Respironics REMstar Plus - First Time Setup

Respironics REMstar Plus
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
First
Time Setup
WARNING!
Do not use the
REMstar
Plus system until an
appropriate
professional
adjusts
the settings! To order any accessories not included
with
this
System,
contact your home care provider.
Note
to home care provider: Before beginning setup, be sure
that
you have
available
the
REMstar
Plus Home Care Provider Setup Instructions. It
contains instructions for
setting
up the
REMstar
Plus.
WARNING!
DO NOT connect any
equipment
to the
REMstar
Plus unless recommended by
Respironics
or your
health
care professional.
CAUTION!
ATTENTION!
CAUTION!
If
the
REMstar
Plus has been exposed to either
very
hot or
very
cold
temperatures,
allow
it to adjust to room
temperature
(approximately
2 hours)
before beginning setup.
Large
elevation
changes will affect the pressure being delivered by the
REMstar
Plus. Refer to the "Traveling
with
the System" section
if
you relocate
or travel to areas
with
a significantly higher or lower
elevation.
Your
home care provider will have
installed
the filter(s).
The
pollen
filter
must
be in place at all
times
when the
REMstar
Plus is operating. The
white
ultra-
fine
filter
is optional and can be used in
addition
to the pollen
filter.
The
ultra-fine
filter
is recommended for
people
who are
sensitive
to tobacco smoke
or other small particles.
8 O
REMstar Plus
User
Manual

Related product manuals