Place the complete sieve stack centrally on the device and clamp the sieve stack
( Chapter "Sieve Clamping Unit "economy" and "standard"" or "Sieve Clamping Unit
"comfort"").
Set the optimum amplitude value and sieving time ( Chapter "Controlling the Device").
Start the sieving process.
After the end of the sieving process, weigh the individual test sieves and the collecting pan
including the particle size fractions present therein.
Determine the mass of the particle size fractions (weight after the sieving less the respective
empty weight).
The evaluation software "EasySieve
®
" automatically records the weights and allows for a
quick and simple evaluation of the sieve analysis. When the device is controlled via
EasySieve
®
, "ES" is indicated in the display "memory" (H8). A detailed description can be
found in the separate manual of the software.
To Next Page
Loading...