1.5 Repairs
This manual does not contain any repair instructions. For safety reasons, repairs may only be
carried out by Retsch GmbH or an authorised representative or by qualified service technicians.
In case of repair, please inform…
…the Retsch GmbH representative in your country,
…your supplier, or
…Retsch GmbH directly.
Service address:
1.6 Responsibility of the operating company
The user of the machine (the operating company) is responsible for ensuring that every person
who works on the machine has been given precise instructions on the basis of this Manual
(commissioning, operation, servicing). Training for operators must cover the following points:
• Intended purpose of the machine
• Hazardous areas
• Safety provisions
• You must be satisfied that staff have the requisite qualifications
• General instructions and actions in an emergency
• Applicable accident prevention regulations
• Personal protective clothing required
• Operation of the machine in line with this Manual
• Accepted, applicable rules governing occupational health and safety
Incorporate the RS 300 into your emergency planning:
• Integrate the RS 300 into your operating procedures regulating conduct in
emergency situations.
• To prevent accidents during work processes, incorporate the RS 300 into
your risk assessment in acc. with the German Ordinance on Industrial
Health and Safety (BetrSichV).
• Take into consideration fire-fighting measures, combatting the effect of
leaking substances, potential radiation, rescuing people, first-aid
measures.
To Next Page
Loading...