1.7 Personnel qualification and target group of this manual
This manual is intended for trained assembly personnel , maintenance staff and users .
Training must be provided in the language of the personnel concerned so that all instructions
are understood. As such the following personnel qualifications are necessary:
Assembly,
commissioning,
instruction,
troubleshooting,
servicing work,
as described in this
manual
Skilled technical staff as well as external service providers who
speak German and the language of the operating personnel.
The usual skills communicated during training, e.g. as a plant
fitter, mechatronics engineer or toolmaker, are prerequisites for
the assembly, commissioning and troubleshooting of the
machine. Employees must be able to manage all applicable
mechanical tasks and be familiar with and have experience of
dealing with these.
Education/training in accordance with the above section,
responsibilities of trained employees.
They must be experienced, trained professionals, familiar with
requirements and guidelines.
To Next Page
Loading...