Retsch Twister - Protective equipment; Motor rotation speed

Technical data
13
requirements are very low in this device because the sample is transported virtually
completely from the grinding chamber.
Advantages at a glance:
• Ideal for the grinding of animal feed, green feed and similar materials
• 3 controlled rotor speeds
• Cyclone with 250 ml collecting receptacle for fast collection of samples
• Simple and fast cleaning, no cross-contamination
Pos: 6.9 /00005 Üb erschriften/1.1 Ü berschrifte n/1.1 Überschrift en BDA/11 Sch utzeinrichtung en @ 0\mod _1226486316130 _9.doc @ 330 4 @ @ 1
4.3 Protective equipment
Pos: 6.10 /00010 Bedienungsa nleitungen Kapitels ammlungen/T wister Mill (2011) /0005 Zyklon Mill Twister Tec hnische Dat en/0515 NIR M odul Schutzeinri chtungen @ 3 \mod_1284362 213067_9.doc @ 23088 @ @ 1
The grinding chamber of this device is interlocked with a resistant protective hood
with safety switch.
It is only possible to start the device if the protective hood is closed.
The device can only be started if cassette and lid are in place.
Pos: 6.11 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Antrie b @ 1\m od_1240475743 011_9.doc @ 8 557 @ @ 1
4.4 Drive output
Pos: 6.12 /00010 Bedienungsa nleitungen Ka pitelsammlungen/T wister Mill (2011) /0005 Zyklon Mill Twister Tec hnische Daten/0 520 NIR Modul Antrieb @ 3\mod_1284 362218395_9.d oc @ 23169 @ @ 1
Universal series motor
Pos: 6.13 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Ne nnleistung @ 0\mod_122649 1873164_9.doc @ 3334 @ @ 1
4.5 Rated power
Pos: 6.14 /00010 Bedienungsa nleitungen Kapitels ammlungen/T wister Mill (2011) /0005 Zyklon Mill Twister Tec hnische Daten/0 525 NIR M odul Nennleist ung @ 3\mod _1284362220427 _9.doc @ 231 78 @ @ 1
Motor capacity: approx. 900 watts
Pos: 6.15 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Mo tordrehzahl @ 1\mod_12415 08280705_9.d oc @ 8763 @ @ 1
4.6 Motor rotation speed
Pos: 6.16 /00010 Bedienungsa nleitungen Kapitels ammlungen/T wister Mill (2011) /0005 Zyklon Mill Twister Tec hnische Daten/0 530 NIR Modul Motordr ehzahl @ 3\mo d_128436221373 9_9.doc @ 23 097 @ @ 1
The motor speed can be adjusted to three levels:
LOW: 10000 revolutions per minute (10 x 1000 rpm)
MID: 12000 revolutions per minute (12 x 1000 rpm)
HIGH: 14000 revolutions per minute (14 x 1000 rpm)
Fig. 2: Setting motor speed
Pos: 6.17 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Übersc hriften BDA/11 Ne nnspannung en @ 1\mod_1 24047602449 4_9.doc @ 8571 @ @ 1
4.7 Rated voltage
Pos: 6.18 /00010 Bedienungsa nleitungen Kapitels ammlungen/T wister Mill (2011) /0005 Zyklon Mill Twister Tec hnische Daten/0 535 NIR M odul Nennsp annungen @ 3\ mod_12843622 14380_9.doc @ 23106 @ @ 1
Rated voltages: 220V - 240 V 50/60 Hz (+/- 5%)
110V - 120V 50/60 Hz (+/- 5%)