Operating the machine
19
Pos: 7.13 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Be dienung des G erätes @ 0\m od_12294164 65774_9.doc @ 5 052 @ @ 1
5.5 Operating the Device
Pos: 7.14 /00004 Warnhinweis e/V0060 VORSICHT Erfassen oder Aufwickeln (Z yklon Mill T wister) @ 3\m od_1288860192 487_9.doc @ 2 3976 @ @ 1
Bruising and injury
Danger from becoming caught or wound up
– Long pieces of clothing or hair can become caught in the device.
• Wear closely fitting work clothes.
• Secure long hair with appropriate head covering.
• Place the splashback cover on the filling funnel.
Pos: 7.15 /00004 Warnhinweis e/V0007 VORSICHT Herabfallen des Gerätes / Standfestigkeit @ 1\mod_1 248178329919_9. doc @ 11690 @ @ 1
Device falling down
Incorrect assembly or unsuitable workplace
- The appliance is very heavy and can therefore cause serious personal injuries if
it falls down.
Operate the device only on a sufficiently large, firm, skid-resistant and
steady workplace.
Make sure that all equipment feet are steady.
Pos: 7.16 /00004 Warnhinweis e/V0044 VORSICHT Gehörsc haden (GM300, SM200, SM30 0) @ 1\mod_1 248181519795_9. doc @ 11731 @ @ 1
Damage to hearing
The level of noise can be high depending on the type of material,
the knife used, the speed set and the duration of the grinding
process.
- Noise that is excessive in terms of level and duration can cause
impaired or permanently damaged hearing.
• Ensure suitable sound-proofing measures or wear
hearing protection.
Pos: 7.17 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Ei n- / Ausschal ten @ 0\mod_12 29416527496 _9.doc @ 505 8 @ @ 1
5.6 Switching On and Off
Pos: 7.18 /00010 Bedienungsa nleitungen Kapitels ammlungen/T wister Mill (2011) /0015 Zyklon Mill Twister Bedi enung/1560 NIR M odul Ei n-/Ausschalten @ 3\mod_12 84538323084_9. doc @ 23421 @ @ 1
The main switch (V) is located on the reverse side of the device.
• Switch on the main switch.
The last used speed appears in the SPEED display.
To Next Page
Loading...
