Authorized person for the compilation of technical documents:
Dr. Loredana Di Labio (technical documentation)
The following records are held by Retsch GmbH in the form of Technical Documentation:
Detailed records of engineering development, construction plans, study (analysis) of the measures required for
conformity assurance, analysis of the residual risks involved and operating instructions in due form according to
the approved regulations for preparation of user information data.
The CE-conformity of the Retsch Laboratory Rotor Mill TWISTER is assured herewith.
In case of a modification to the machine not previously agreed with us as well as the use of not
licensed spare parts and accessories this certificate will lose its validity.
Retsch GmbH Haan, April 2016
Dr.-Ing. Frank Janetta
Manager Development
Retsch GmbH Retsch-Allee 1-5 42781 Haan Germany w ww.retsch.com
Certificate of CE-Conformity according to:
EC Mechanical Engineering Directive 2006/42/EC
Applied harmonized standards, in particular:
DIN EN ISO 12100 Security of machines
DIN EN ISO 12852–5.1.1 Food processors and blenders
DIN EN ISO 13849-1 Safety related parts of control systems
EC Directive Electromagnetic Compatibility 2014/30/EU
Applied standards, in particular:
DIN EN 55011 Emission
DIN EN 61000-3-2 DIN EN 61000-3-3 Emission
DIN EN 61326-1 Immunity
Additional applied standards, in particular
DIN EN 61010-1 Safety prescriptions concerning measuring-, operating-, controlling- and
laboratory equipment
LABORATORY ROTOR MILL
TWISTER – Cyclone Mill 20.831.xxxx
CERTIFICATE OF CE-CONFORMITY
Translation
To Next Page
Loading...
