Revopoint 3D Technologies MINI - Click New Scan to Select Accuracy, Scan Mode and Texture; Confirm Distance to be Excellent

To Next Page

To Previous Page

MINI 3D Scanner User Manual

Click New Scan to select Accuracy, Scan Mode and Texture

Once connected successfully, the device is ready to scan. Configure the desired operational characteristics as described in

Section 2. New Scan (see p. 9-10) of the UI Introduction.

Confirm distance to be "Excellent"

After specifying the Accuracy, Scan Mode and Texture options, press “OK” to enter the scanning page. The top area of the

3D Model Preview window shows the distance. Position the MINI scanner or the object to confirm an "

Excellent

" distance

and keep it during scanning. Higher-resolution scans are possible in the “Too near” range, but tracking is more likely to be

lost.

Other manuals for Revopoint 3D Technologies MINI