MINI 3D Scanner User Manual
COPYRIGHT ©2022 REVOPOINT 3D ALL RIGHTS RESERVED 22
Operation Tips
Lose Track
If the 3D Model Preview window displays a "Lose track" notice during scanning, please re-target the scanner to a
previously scanned area (blue) and keep still for several seconds so that the scanner can re-acquire tracking. When the red
portion of the display changes to green, scanning can resume.
Too Few Points
If the "Few Point Amount" prompts appear, check whether the distance between the scanner and the object is too close or
too far and adjust the distance between the scanner and the object so that the distance indicator highlights “Excellent”
before continuing scanning.
When a "Lose Track" warning is displaying, please re-target the MINI
cameras back to a scanned area (blue) and keep still for several seconds to
re-acquire tracking. Resume scanning when red changes to green.
To Next Page
Loading...
