Revopoint 3D Technologies MINI - System Setup and Software; System Requirements; Software Installation; Indicator Legend

MINI 3D Scanner User Manual
COPYRIGHT ©2022 REVOPOINT 3D ALL RIGHTS RESERVED 4
Specifications
Product Name
Revopoint 3D Scanner
Product Model
MINI
Technology
Dual-camera blue light
Single-frame Precision
[1]
0.02 (mm)
Single-frame Accuracy
[2]
0.05 (mm)
Single capture range
64 x 118 (mm)
Working distance
100 ~ 200 (mm)
Minimum scan volume
10×10×10 (mm)
Scan speed
Up to 10 fps
Light source
Class 1 blue light
Alignment
Feature, Marker
Start/Stop Push button
Yes
Output format
PLY, OBJ, STL
Texture scan
Yes
Special object scanning
For dark, highly reflective and/or transparent objects, it is
recommended to use scanning spray.
Scanning Environment
Indoor
Scanner weight
160g
Dimensions
120×38.5×25 (mm)
Printable data output
Direct export to 3D printing software application;
Required computer configurations
Windows 8 / 10 / 11 (64-bit), Android, iOS, MAC
Wi-Fi
5 GHz
Connection Type
Micro-B – Type-A USB
Note
*The accuracy above is acquired in a standard lab environment.
Individual scan accuracy and results may vary based on a number of
factors, including environmental conditions, type of object(s) being
scanned, scanner calibration, and proper software application
settings.
* Windows 7 is not supported.