Revopoint 3D Technologies MINI - Scan Settings and Distance

MINI 3D Scanner User Manual
7 COPYRIGHT ©2022 REVOPOINT 3D ALL RIGHTS RESERVED
Indicator Legend
 Avoid direct eye exposure for extended periods of time! Refer to Standards for Class 1 Lasers for details.
Software Installation
System Requirements
USB mode or Wi-Fi Mode Support
Windows
Android
iOS/iPad
Mac
USB Mode
YES
YES
NOT Supported
YES
Wi-Fi Mode
YES
YES
YES
YES
Install Software
Software provided: Revo Scan, Revo Studio and Revo Calibration. Revo Scan is a scanning software application that allows
the end user to scan object(s) in either handheld mode or turntable mode; Revo Studio is a post-process software application
used for processing raw point cloud data, and aligning multiple scan data sets into a solid mesh; The Revo Calibration
allows collimation adjustments to the optical parameters of Mini, ensuring accurate scan results.
Download the Revo software at our website
：
revopoint3d.com/download-2/

The Revo Studio and Revo Calibration will be introduced successively, and the related instructions will be available then. Revo Studio and
Revo Calibration user manuals are not included in this user guide and will be released separately.
Windows: Win 8 / 10 / 11 (64-bit)
Memory：≥ 8G
*The Windows 7 is not supported.
Android： ≥Android 9.0
RAM：≥ 6GB
*Harmony OS is supported.
Mac with Intel × 86 chip: Mac OS 10.15 and models after；
Mac with Apple M1 chip: Mac OS 11.0 and models after；
Memory: ≥ 8G
iPhone: iPhone 8 Plus or models after;
iPad: 6
th
generation iPad and models after;
System Version: ≥ iOS 13.0
Green Light:
Working Correctly
Blue Light:
Starting