Option 1: Vibration Detection
18
Please select your preferred mode from the camera settings, it will allow
the dash cam to switch to parking mode automatically if the vehicle’s
engine turns off and switch back to the normal recording after vehicle’s
engine turns on.
Gravity Sensing Record
The Gravity Sensing detects significant or sudden movement (such as an
impact or collision), it will trigger an event recording. We suggest setting
the “Gravity Sensing” to High sensitivity for Parking Mode Recording.
Parking Monitor
(Parking Surveillance Mode)
Parking monitor provides surveillance on your parked vehicle.
Note
If you do not use the parking mode function, please change G-sensor
setting to low sensitivity. Otherwise, the dash cam will easily lock the video
and it cannot be deleted by the loop recording function. This will cause
the memory card to be full of locked videos and cause the recorder to fail
to work normally.
Note
Rexing Dash Cam Smart Hardwire Kit, Type-C Hard Wire Kit Needed.
18
To Next Page
Loading...
