RE 92004-01-S031/08.2015 | A4VG Series 40 Bosch Rexroth AG 7/40
General safety instructions
pertaining to the work to be done. Qualified personnel must observe the rules
relevant to the subject area.
2.4 Safety instructions in this manual
In this manual, there are safety instructions before the steps whenever there
is a danger of personal injury or damage to equipment. The described danger
prevention measures must be observed.
Safety instructions are set out as follows:
Type of danger!
Consequences
f Precautions
• Safety signs: (warning triangle): draw attention to danger
• Signal word: identifies the degree of the danger
• Type of danger: identifies the type or source of the danger
• Consequences: describes what occurs if the safety instructions are not
complied with
• Precautions: states how the danger can be avoided.
The signal words have the following meaning:
Signal word Application
DANGER! Indicates an imminently hazardous situation which, if not
avoided, will certainly result in death or serious injury.
WARNING! Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION! Indicates a potentially hazardous situation which, if not
avoided, could result in minor or moderate injury or damage to
equipment.
If this information is disregarded, the operating procedure may
be impaired.
2.5 Adhere to the following instructions
• Observe the regulations for accident prevention and environmental protection
for the country where the product is used and at the workplace.
• Only operate Rexroth axial piston units in good technical order and condition.
• Use the product only within the performance range provided in the technical
data.
• Repairs to the axial piston unit may only be performed by authorized, skilled
and instructed personnel.
• Persons who repair, install, commission, operate, remove or maintain Rexroth
products must not consume any alcohol, drugs or pharmaceuticals that may
affect their ability to respond.
• The warranty applies only to the delivered configuration.
SIGNAL WORD!
General instructions
To Next Page
Loading...
