REXROTH A4VSG User Manual

Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
Instruction manual
RE 92100-01-B/09.2012
Replaces: –.–
English
Axial Piston Variable Pump
A4VSG
Series 10, 11 and 30

REXROTH A4VSG Specifications

General

Brand	REXROTH
Model	A4VSG
Category	Water Pump
Language	English

Summary

Safety instructions

2.2 Intended use

Defines the specific applications for which the axial piston unit is approved.

2.3 Improper use

Details uses considered impermissible and the associated liabilities.

2.5 General safety instructions

Provides overarching safety regulations and precautions for use and operation.

2.6 Product-specific safety instructions

Details safety instructions specific to chapters 6 through 14 of the manual.

2.7 Personal protective equipment

Assigns responsibility for PPE and emphasizes its proper condition.

General instructions on damage to equipment and the product

Installation

7.2 Installation conditions

Explains the factors at the installation location that influence installation and commissioning procedures.

7.3 Installation position

Describes permissible installation positions and their potential impact on unit performance.

7.4 Installing the axial piston unit

Details the step-by-step process for installing the axial piston unit.

Commissioning

8.1 First commissioning

Details the initial steps and checks required before operating the unit.

8.2 Running-in phase

Maintenance and repair

10.4 Repair

10.5 Spare parts

Removal and replacement

11.3 Removing the axial piston unit

Troubleshooting

14.1 How to proceed for troubleshooting

14.2 Malfunction table

Lists common faults, their possible causes, and recommended remedies for the axial piston unit.