REXROTH A4VSG - 12 Disposal; 13 Extension and Conversion

Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
52/60 Disposal
Bosch Rexroth AG, RE 92100-01-B/09.2012 Series 10, 11 and 30,
12 Disposal
Careless disposal of the axial piston unit, the hydraulic fluid and the packaging
material could lead to pollution of the environment.
Observe the following points when disposing of the axial piston unit:
1. Completely empty the axial piston unit.
2. Dispose of the axial piston unit and packaging material in accordance with the
national regulations in your country.
3. Dispose of the hydraulic fluid according to the national regulations of your
country. Also observe the applicable safety data sheet for the hydraulic fluid.
4. Remove the axial piston unit into its individual parts and properly recycle these
parts.
5. Separate according to, for instance:
– Cast parts
– Steel
– Aluminum
– Non-ferrous metal
– Electronic waste
– Plastic
– Seals
13 Extension and conversion
Do not modify the axial piston unit or its fittings. This includes changes to the setting
screws or wiring.
The Bosch Rexroth warranty only applies for the delivered configuration. In case
of conversion or extension, the entitlement under warranty will be rendered void.
Changing the setting of the setting screw will void the warranty. If you need to
change settings, contact your responsible Bosch Rexroth Service partner (for
addresses, see chapter10.5 "Spare parts" on page50.