Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
Safety instructions 11/60
RE 92100-01-B/09.2012, A4VSG Series 10, 11 and 30, Bosch Rexroth AG
permitted in the product documentation, for example in ex-protection applications
or in safety-related parts of a control system (functional safety).
t You may only commission the product if it has been determined that the end
product (e.g. machinery or a system) into which the Rexroth products are installed
complies with the country-specific provisions, safety regulations and standards of
the application.
2.6 Product-specific safety instructions
The following safety instructions apply for chapters 6 to 14.
WARNING
Danger from excessively high pressure!
Danger to life or risk of injury, damage to equipment!
Incorrectly changing the factory pressure setting can cause pressure to increase
beyond the permissible maximum pressure.
Operating the unit above the permissible maximum pressure can cause
components to burst and hydraulic fluid to escape under high pressure.
▶ Changes to the factory settings must only be made by Bosch Rexroth specialist
personnel.
▶ In addition, a pressure-relief valve is needed as back-up in the hydraulic system.
If the axial piston unit is equipped with a pressure cut-off and/or a pressure
control, this is not an adequate back-up against pressure overload.
Danger from suspended loads!
Danger to life or risk of injury, damage to equipment!
Improper transportation may cause the axial piston unit to fall down lead to injuries
e.g. crushing or broken bones or damage to the product.
▶ Make certain that the forklift truck or lifting device has adequate lifting capacity.
▶ Never stand under or put you hands under suspended loads.
▶ Ensure your position is stable during transportation.
▶ Use your personal protective equipment (e.g. safety glasses, safety gloves,
suitable working clothes, safety shoes).
▶ Use suitable lifting devices for transportation.
▶ Observe the prescribed position of the lifting strap.
▶ Observe the national laws and regulations on work and health protection and
transportation.
To Next Page
Loading...
