REXROTH A4VSG - 1 About this Manual; Validity of the Documentation; Required and Supplementary Documentation

Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
About this manual 5/60
RE 92100-01-B/09.2012, A4VSG Series 10, 11 and 30, Bosch Rexroth AG
1 About this manual
1.1 Validity of the documentation
This documentation applies to the following products:
t Axial piston variable pump A4VSG Series 10, 11 and 30
This documentation is intended for machine/system manufacturers, fitters and
service technicians.
This documentation contains important information on the safe and appropriate
transport, installation, commissioning, operation, maintenance, removal and simple
troubleshooting of the axial piston unit.
▶ Read this documentation completely and in particular the chapter2 "Safety
instructions" on page9 and chapter3 "General instructions on damage to
equipment and the product" on page14 before you start work with the axial
piston unit.
1.2 Required and supplementary documentation
▶ Only commission the axial piston unit if the documentation marked with the book
symbol
is available to you and you have understood and observed it.
Table 1: Required and supplementary documentation
Title Document number Document type
Order confirmation
Contains the order-related technical data of your A4VSG axial piston variable
pump.
– Order confirmation
Installation drawing
Contains the outer dimensions, all connections and the hydraulic schematic
for your A4VSG axial piston variable pump.
Please request the
installation drawing
via your contact
person at Bosch
Rexroth.
Installation drawing
Axial piston variable pump A4VSG
Contains the permissible technical data.
RE 92100 Data sheet
Secondary regulation with A4VSO/G axial piston units
Describes the closed loop speed control, DS1 secondary control.
RE 92056 Data sheet
Control devices DR, DP, FR and DFR
Describes the control devices pressure control, pressure control for parallel
operation, flow controller and pressure/flow controller.
RE 92060 Data sheet
Control units MA and EM
Describes the manual control and the electric motor control.
RE 92072 Data sheet
Control systems HM, HS, HS4 and EO
Describes the hydraulic control, volume-related and the control system with
servo or proportional valves.
RE 92076 Data sheet
Hydraulic control, pilot-pressure related HD
Describes the hydraulic control, pilot-pressure-related HD.
RE 92080 Data sheet
Electro-hydraulic control with proportional solenoid EP
Describes the electro-hydraulic control with proportional solenoid EP.
RE 92084 Data sheet
Mineral-oil based hydraulic fluid and related hydrocarbons
Describes the requirements on a mineral-oil based hydraulic fluid and related
hydrocarbons for the operation with Rexroth hydraulic components, and assists
you in selecting a hydraulic fluid for your hydraulic system.
RE 90220 Data sheet