REXROTH A4VSG - 7.2 Installation conditions; 7.3 Installation position; 7.4 Installing the axial piston unit

Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
4/60
Bosch Rexroth AG, RE 92100-01-B/09.2012 Series 10, 11 and 30,
8 Commissioning 43
8.1 First commissioning 43
8.1.1 Filling the axial piston unit 43
8.1.2 Testing the hydraulic fluid supply 45
8.1.3 Performing functional test 45
8.2
Running-in phase 46
8.3 Recommissioning after standstill 46
9 Operation 47
10 Maintenance and repair 48
10.1 Cleaning and care 48
10.2 Inspection 49
10.3 Maintenance 49
10.4 Repair 50
10.5
Spare parts 50
11 Removal and replacement 51
11.1 Required tools 51
11.2 Preparing for removal 51
11.3 Removing the axial piston unit 51
11.4 Preparing the components for storage or further use 51
12 Disposal 52
13 Extension and conversion 52
14 Troubleshooting 53
14.1 How to proceed for troubleshooting 53
14.2 Malfunction table 54
15 Technical data 56
16 Alphabetical index 57
Contents