REXROTH A4VG - Operators Responsibilities and Training

RE 92004-01-S031/08.2015 | A4VG Series 40 Bosch Rexroth AG 9/40
General safety instructions
2.6 Operator's obligations
The operator of the Rexroth axial piston unit must provide personnel training on a
regular basis regarding the following subjects:
• Observation and use of the instruction manual and the legal regulations
• Intended use and operation of the axial piston unit
• Observation of the instructions from the factory security offices and of the work
instructions from the operator
Rexroth offers training support for special fields. You can find an overview of
the training contents on the Internet at: http://www.
boschrexroth.de/didactic.