2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e 25
Image 28: GETID (32) Data Display
GetQueued ID Pressing this button will return the data bytes for the last card read 255 bits
maximum
Image 29: GETQueuedID Data Display
Clear Lockout Check to clear the time remaining to allow the reader to read the next card
immediately
Clear UID If Clear UID is checked the card and the overrun counters will be cleared for the
next read If Clear lockout is checked the reader can read another card
HH:MM:SS displays 00:00:55
To Next Page
Loading...
