RF IDeas WAVE ID - Configuration Utility Guide

2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e  6
Chapter 
Software
21 rf IDEAS Configuration Utility
The rf IDEAS Configuration Utility provides users with the ability to configure their WAVE ID
Solo and WAVE ID Plus readers
The Utility allows WAVE ID Plus to be configured for 2 or 4 depending on model card types
rf IDEAS WAVE ID Plus readers with extended functionality can operate in one of two modes
Data Format mode ID processing or the Extended mode ID processing for output
generation The default mode of processing is Data Format mode
The utility can be downloaded from the website and while opening the application after
installation for the first time user will need to accept the End User License Agreement
EULA as shown in image below:
Image 1: End User License Agreement (EULA)