Beijing RuiZhitianhong technology Co.Ltd.
ADD.：A308 jiahua building, 9 Shangdi 3rd Street, Haidian District, Beijing. P.C.：100085.
Dell：+86-10-62970368/82923063 Fax：+86-10-82920078 URL：www.richnc.com.cn 28
save.After modifying X、Y、Z、A pulse equiv，press“ ”to confirm.
Spindle delay：Unit：ms;including start delay and stop delay.
corresponding system parameters. System default “3-line 8-state”, if users need
“1-line 2-state(On/Off)”, users can change the number of lines is 1; See detailed
settings at spindle output wiring.
Spindle Max Spd：User should set this menu if choosing 10V analog quantitiy
to control the spindle speed,the number is the maximum speed of the
spindle.Unit:r/minute.User do not need modify this menu if choosing
“muti-step”mode.
Home speed ： Every axis movement speed when back home,system default
speed X，Y: 3000 MM/Minute, Z: 1800 MM/Minute.
Setting：Enter “Home speed”，screen shows：
Press“ ”、“ ” to move cursor to where users want to modify, press
“ ”，input the new number，press “ ” to save.After modifying X、Y、Z
home speed，press“ ”to confirm.
Home order：Every axis movement order when back home.
Including：
To Next Page
Loading...
