Beijing RuiZhitianhong technology Co.Ltd.
ADD.：A308 jiahua building, 9 Shangdi 3rd Street, Haidian District, Beijing. P.C.：100085.
Dell：+86-10-62970368/82923063 Fax：+86-10-82920078 URL：www.richnc.com.cn 30
The maximum acceleration value during acceleration and deceleration
movement, improve (including straight and curved motion) processing capabilities. If
acceleration is too large, it may cause the motor losing steps, jitter and even whistle, if
too small, it will lead to accelerated slowly and reduce the operating speed of the
entire graph.
Suggest curve acceleration 1-1.5 times linear acceleration.
Jerk refers to the growth rate of acceleration,and moderate adverse impact
caused by a sudden deceleration.
Setting：Enter “Accel”，press “ ”、“ ” to move cursor to where
users want to modify，press “ ”，screen shows:
Choose your type，press“ ”to confirm,and then press“ ”、“ ”
to move cursor to each axis“Accel”and“JAccel”，press “ ” and input the new
number，press “ ” to save.Same operations to modify other options.
To Next Page
Loading...
