Beijing RuiZhitianhong technology Co.Ltd.
ADD.：A308 jiahua building, 9 Shangdi 3rd Street, Haidian District, Beijing. P.C.：100085.
Dell：+86-10-62970368/82923063 Fax：+86-10-82920078 URL：www.richnc.com.cn 70
1) Press“ ”、“ ” to move cursor to“Auto resize”，and then press
2) Press “ ”、“ ”to move to the option witch needs to modified,
then press “ ”to input new value, press “ ” save the
modification.
3) After modified all the options, press “ ”to start processing.
200mm X 200mm Circle
10mm（X Negative gaps） 10mm（X Positive gaps）
X、Y axis origin：Offset value of the new workpiece origin which is relative
To Next Page
Loading...
