Ricoh 2045e - Page 28

Preparations for Use as a Network Scanner
18
2
r If a paper jam occurs or any of
the following operation is per-
formed while the machine is
waiting for additional originals,
the countdown stops and does
not start again until the {#} key
is pressed.
• Changing the settings such
as the scan settings
• Opening the upper cover of
the ADF
•Pressing the {Interrupt} key to
activate the copy mode
v Original Setting
Set the default for whether origi-
nals are one-sided or two-sided
and if two-sided, the relationship
between those sides. When the
originals are always the same, set
this for the default to make opera-
tion easier. You can select [1 Sided
Original], [2 Sided Orig.:T to T] (Top to
Top), or [2 Sided Orig.:T to B] (Top to
Bottom).
Reference
p.39 “Original Orientation and
Scan Area”
v Original Feed Type Priority
Multiple originals can be divided
and scanned separately using the
exposure glass or ADF to form a
single file. In this case, the waiting
time for placing additional origi-
nals to scan can be specified.
If [SADF] is selected, the [Wait Time
for Next Original(s): SADF] setting
will be valid when scanning.
If [Batch] is selected, scanning will
start when the additional originals
are placed and the {Start} key is
pressed regardless of the setting
for [Wait Time for Next Orig.: Exposure
Glass] or [Wait Time for Next Origi-
nal(s): SADF].
If [Off] is selected, the [Wait Time for
Next Orig.: Exposure Glass] setting is
valid when scanning.
Note
r The countdown for scanning
additional originals stops when
scanning conditions are
changed. The machine keeps
waiting for restarting the count-
down until the {# } key is
pressed.
v Mixed Original Sizes Priority
This setting determines whether
the original size is to be automati-
cally detected when originals of
different sizes are inserted in the
ADF. You can select [On] or [Off].
Note
r If the original size is specified
when scanning, this setting is
ignored.
r When [Off] is selected and [Auto
Detect] is selected for scan size, if
originals of different sizes are
placed in the ADF, the maxi-
mum size will be detected as the
scan size.
v Original Orientation Priority
Select the default for original
placement orientation. When orig-
inals are always positioned the
same way, select that orientation
as the default to make operation
easier.
Reference
p.39 “Original Orientation and
Scan Area”