Ricoh 2045e - Display Contents

Network Scanner
10
1
Display Contents
This section explains the normal screen configuration.
The display's contents differ depending on the function.
Note
r The Copy screen is set as the default screen when the machine is turned on.
You can change this setting in the System Settings. See General Settings Guide.
Using e-mail
Press the {Scanner} key to display the e-mail screen (when [E-mail/ Folder] has
been selected in [Destination List Display Priority 1] and [E-mail Address] has been se-
lected in [Destination List Display Priority 2]). If the Network TWAIN Scanner screen
appears, press [Exit].
Reference
For information about Destination List Display Priority, see p.20 “Destination
List Settings”.
Using Scan to Folder
Press the {Scanner} key to display the Scan to Folder screen (When [E-mail/ Folder]
has been selected in [Destination List Display Priority 1] and [Folder] has been select-
ed in [Destination List Display Priority 2]). If the Network TWAIN Scanner screen
appears, press [Exit].
For information about Destination List Display Priority, see p.20 “Destination
List Settings”.
***
Scan-
001
.t
if***