Original Orientation and Scan Area
43
3
Note
r When the scan settings are
changed while performing
the procedure, the count-
down for additional origi-
nals is stopped. Press the
{Start} key to restart the
countdown.
When using the ADF
A Select [SADF] in [Original Feed
Type].
B Press the {Start} key.
When scanning is finished, the
remainder time until the addi-
tional original is placed is dis-
played.
C When there are additional
originals, repeat placing them
within the specified time.
The machine starts scanning au-
tomatically.
Note
r When the scan settings are
changed while performing
the procedure, the count-
down for additional origi-
nals is stopped. Press the
{Start} key to restart the
countdown.
r You can also use the expo-
sure glass instead of the
ADF. In this case, you must
press the {Start} key to start
scanning.
D When all originals are scanned
and the countdown is finished,
the machine starts storing or
sending automatically.
Note
r You can also press the {#}
key to restart storing or send-
ing.
Not specifying a time limit for additional
originals
A Place the originals.
Reference
See p.35 “Placing Originals”.
Note
r Originals are scanned in order.
Place them from the first page.
B Make settings for scanning area
and original orientation.
Reference
p.39 “Original Orientation and
Scan Area”
C Select [Batch] for [Original Feed
Type].
D Make settings for sending by e-
mail, or Scan to Folder, storing, or
delivering.
Reference
p.47 “Procedure for Sending E-
mail”
p.61 “Procedure for Sending by
Scan to Folder”
p.74 “Storage Procedure”
p.87 “Delivery Procedure”
To Next Page
Loading...
