Ricoh 816 - 1 Placing Originals; Originals; Sizes and Weights of Recommended Originals

7
1. Placing Originals
This chapter describes the types of originals you can set and how to place originals.
Originals
This section describes the types of originals that can be placed, and missing im-
age area.
Sizes and Weights of Recommended Originals
The following describes recommended paper sizes and weights, and non-com-
patible originals for the ARDF.
❖ Metric version
❖ Inch version
Note
❒ About 50 originals (80 g/m
2
, 20 lb.) can be placed in the ARDF.
❒ Do not place 2-sided originals in the ARDF if they are 17 lb. or less in weight
and 13" or more in length. Place them on the exposure glass instead.
Where original is
placed
Original size Original weight
Exposure glass Up to A4 --
ARDF One-sided originals:
A4L – A5KL
52-105 g/m
2
Two-sided originals:
A4L – A5L
52–105 g/m
2
Where original is
placed
Original size Original weight
Exposure glass
Up to 8
1
/
2
" × 14"
--
ARDF One-sided originals:
8
1
/
2
" × 14"L – 5
1
/
2
" × 8
1
/
2
"KL
14-28 lb.
Two-sided originals:
8
1
/
2
" × 14"L – 5
1
/
2
" × 8
1
/
2
"L
14–28 lb.