Placing Originals
12
1
Placing Originals on the Exposure Glass
Place originals on the exposure glass.
Important
❒ Do not lift the exposure glass cover or ARDF forcefully. Otherwise, it will be
damaged, or the cover of the ARDF might open.
A Lift the exposure glass cover or ARDF.
B Place the original face down on the exposure glass. The original should be
aligned with the rear left corner.
Start with the first page to be copied.
1 Positioning mark
2 Left scale
C Lower the exposure glass cover or ARDF.
ARC043S
To Next Page
Loading...
