Ricoh 816 - Specifying the Original Size When the Bypass Tray Is Selected

Placing Originals
17
1
Specifying the Original Size When the Bypass Tray is Selected
You can select either regular or custom for the size of the original when the by-
pass tray is selected.
Regular sizes
When placing regular size originals on the exposure glass or in the ARDF, select
the size of the originals from the regular sizes shown on the display.
If you do not specify the original size, the machine will make copies on the paper
size in the tray selected. When copy paper size and original size differ, you need
to specify the original size as follows:
A Select the bypass tray using {U} or {T}.
B Press the {q} key.
C Select [Original Size] using {U} or {T}, and then press the {OK} key.
D Select [Regular Size] using {U} or {T}, and then press the {OK} key.