Placing Originals
15
1
D Select the original size using the scroll keys, and then press the {OK} key.
The “
Programmed” message appears.
When the regular size originals settings are registered, appears
on the top of the copy display.
Note
❒ To cancel the size you have set, press the {Clear Modes} key.
Custom sizes
When placing custom size originals on the exposure glass or in the ARDF, spec-
ify the size of the originals using the number keys.
Important
❒ Original sizes that can be set with this function are:
• ARDF: vertical 139-216 mm (5.5"-8.5"), horizontal for 1-sided originals 139-
1260 mm (5.5"-49.6"), horizontal for 2-sided originals 160-356 mm (6.3"-14")
• Exposure glass: vertical 139-216 mm (5.5"-8.5"), horizontal 160-356 mm
(6.3"-14")
A Select a desired paper tray using {U} or {T}.
B Press the {q} key.
C Select [Custom Size] using {U} or {T}, and then press the {OK} key.
To Next Page
Loading...
