Copying
24
2
B Push up the release lever.
1 Release lever
C Align the paper guides to the paper size, and then insert the paper face
down.
If the guides are not flush against the paper, images might be skewed or pa-
per misfeeds might occur.
Load only as much paper as can be held between the guides on the bypass
tray. Overloading the bypass tray can result in misfeeds and skewed images.
To support A4L, 8
1
/
2
" × 11"L, or larger paper sizes, pull out the extender.
To prevent multiple sheets from being fed at once, fan paper before placing it
on the tray.
1 Horizontal size
2 Vertical size
3 Extender
4 Paper guides
ZFOY310E
ZFOY250E
To Next Page
Loading...
