12.3 TURN GUIDE SECTION
The junction gate solenoid [A] is energized 1.1 seconds after the registration
clutch has been turned on. Then, the junction gate [B] rotates upwards to
direct the copy paper to the duplex turn guide section. The junction gate
solenoid stays on until the first side copies are stacked in the duplex tray.
The copy is then directed to the duplex entrance guide by the transport
rollers [C]. There is a duplex entrance sensor [D] for paper misfeed detection.
[C]
[C]
[B]
[D]
[A]
Detailed
Descriptions
STM 2-99 A156/A160/A162
To Next Page
Loading...
